 |
 |
Our
experience in recent years has allowed
us to expand our range of shutterings,
offering the heavy series
to the market. It is based on large
dimension, totally metallic panels
which are equally useful for constructing
walls and columns, but much more economical.
|
|
|
enlarge  |
|
| |
|
 Each
panel is made up of an ST44 steel special
profile structure and a 3 mm. steel sheet
which is electrowelded to the structure ensuring
that the surface is completely flat and guaranteeing
a smooth concrete finish.
The joint and alignment
of the panels is made quickly using a key
which only needs a light tap of a hammer to
be inserted. The panels can be combined both
horizontally and vertically and even layered
when the ground is uneven. |
|
|
|
|
INTERIOR
SET SQUARE
3000 x 200 x 250 mm.
It is joined to the panels
using fixed keys. |
 |
|
| |
EXTERIOR
SET SQUARE
3000 x 50 x 100 mm.
It is joined to small panels
using keys to adjust measurements with the
interior set square. |
 |
|
| |
![]()
WORK
CRADLE
It is fastened to the vertical
joints of the panels by means of a key which
is welded to the cradle.
This cradle guarantees the safety of the operators
at work. |
 |
|
![]() |
STIFFENING
GIRDERS
It is advisable to use them
when the shuttering is fixed to high concrete
pressure and perfect alignments are required.
These girders fit together and fasten on to
the panels using iron fittings and two nuts,
without having to be dismantled every time
the shuttering is removed. |
 |
|
|
COMPENSATION
PANEL
The compensation panel is
used when the length of the wall does not
correspond to multiples of the standard panels,
and a space is left over. Spaces of 5 to 25
cm. can be compensated using this panel. |
 |
|
|
COMPENSATION
PROFILE AND ADJUSTABLE KEY
The adjustable key can carry
out compensations of 0 to 12 cm., fastening
one or two 5 cm. profiles or any wooden strip
of 0 to 12 cm. thick, between the panels.
|
 |
|
| |
|
| |
| On
demand, our manufacture allows us to make
a series of drill holes in the panels to adjust
the measurement of the columns by means of
iron fittings and nuts. Columns
can be formed with the standard panels using
exterior set squares which adjust the column
measurement, every 5 cm. minimum: 20 x 20
cm., maximum: 85 x 85 cm.
|
 |
|
| |
- 
